Cranes

TGS is the undisputed leader in the design and manufacture of Cranes for various classes of duty and application ranging from 1 ton to 340 tons.

The Growth Shop has manufactured more than 350 Cranes (including EOT Cranes, Semi Portal Cranes, Gantry Cranes etc.) for application in Steel, Cement, Aluminium, Hydel Power etc.

Ladle Handling Crane		16.6+16.6 ton EOT Crane for Waste Recycling Plant

Cranes Designed to Perfection

The TGS cranes are designed to perfection by set of experienced designers coupled with its vast knowledge nurtured over the decades. Some of the critical design features of TGS cranes are as:

• Stringent adherence to design national and international standards and codes

• Optimized trolley layout, to ensure least undesirable stresses with all the required clearances and operational requirements.

• Grade evaluation of each components to cater the operational requirement for the entire life of crane.

• Fatigue based girder design, this is more critical for heavy duty cranes to ensure adequate life.

• Design optimization through the automation software, to, reduce the weight of crane to the least possible theoretical, limits, adhering all the operation design & safety standards. Crane weight reduction creates additional advantage to the customers, by enabling reduction in the building weight.

• Stress analysis of the critical components through FEM & Pro Engineer

• Adequate and safe provision of platforms and passages for the repair and maintenance of components such as Gear Boxes, Long Travel Wheels, Motors etc.

• Trouble free life of the Crane with lesser downtime. Almost all of the cranes supplied byTGS during the last 3 decades had been running successfully even today, with the same level of performance.

• Design optimization for wheel size, Gear Boxes, Motors ensuring high reliability.

• Critical cranes designed with safety factor taken in consideration including the impact of seismic zone, thunders and storms.

Customized Cranes with features such as

• Creep speed as low as 0.2 m/s

• Single Failure proof cranes

• Provision for isolation and overload relays for motors.

• Hoist brakes with adjustable and dust proof design

• Smooth controlled jerk-less movements.

• Controls designed to prevent skidding and swaying.

20/5 t EOT Crane (Rebar Mill)	Slab Handling Crane

Advantage Customers

Some Special Features:

• Air Conditioned Operator Cabin and Control Electrics

• Radio Remote Control

• Anti-collision Device

• Inbuilt Weighing System

• Motorised Lubrication System

• Stepless Hoisting Speed Control

• Slack Rope Detection System

Special Attachments such as:

• Grab Bucket

• Magnet Handling

• Coil/Slab Handling Tongs

• Lifting Beam etc.

• Easy Maintenance and Less Mean Time to Repair with Modular Drives

• Parking Brakes for Long Travel ensuring additional safety.

• Auto Positioning System, for Automatically Picking Up & Holding the Coils to Pre-programmed Locations & Orientations.

• Rotating Type Trolley